This is the documentation for the latest (main) development branch of Zephyr. If you are looking for the documentation of previous releases, use the drop-down menu on the left and select the desired version.

nxp,kinetis-acmp¶

Vendor: NXP Semiconductors

Description¶

NXP Kinetis Analog Comparator (ACMP)

Properties¶

Properties not inherited from the base binding file.

Name	Type	Details
`nxp,enable-output-pin`	`boolean`	Make the comparator output (CMP0) available on a packaged pin.
`nxp,use-unfiltered-output`	`boolean`	Use the unfiltered comparator output for CMP0.
`nxp,high-speed-mode`	`boolean`	Enable high speed comparison mode.
`nxp,enable-sample`	`boolean`	Enable external sample signal as clock input.
`nxp,filter-count`	`int`	Filter sample count (0 to 7).
`nxp,filter-period`	`int`	Filter sample period in bus clock cycles (0 to 255).
`nxp,window-mode`	`boolean`	Enable windowing mode.
`#io-channel-cells`	`int`	Constant value: `2`

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “nxp,kinetis-acmp” compatible.

Name	Type	Details
`interrupts`	`array`	interrupts for device This property is required. See Important properties for more information.
`label`	`string`	Human readable string describing the device (used as device_get_binding() argument) This property is required. See Important properties for more information.
`reg`	`array`	register space This property is required. See Important properties for more information.
`status`	`string`	indicates the operational status of a device Legal values: `'ok'`, `'okay'`, `'disabled'`, `'reserved'`, `'fail'`, `'fail-sss'` See Important properties for more information.
`compatible`	`string-array`	compatible strings This property is required. See Important properties for more information.
`reg-names`	`string-array`	name of each register space
`interrupts-extended`	`compound`	extended interrupt specifier for device
`interrupt-names`	`string-array`	name of each interrupt
`interrupt-parent`	`phandle`	phandle to interrupt controller node
`clocks`	`phandle-array`	Clock gate information
`clock-names`	`string-array`	name of each clock
`#address-cells`	`int`	number of address cells in reg property
`#size-cells`	`int`	number of size cells in reg property
`dmas`	`phandle-array`	DMA channels specifiers
`dma-names`	`string-array`	Provided names of DMA channel specifiers
`io-channels`	`phandle-array`	IO channels specifiers
`io-channel-names`	`string-array`	Provided names of IO channel specifiers
`wakeup-source`	`boolean`	Property to identify that a device can be used as wake up source. When this property is provided a specific flag is set into the device that tells the system that the device is capable of wake up the system. Wake up capable devices are disabled (interruptions will not wake up the system) by default but they can be enabled at runtime if necessary.

Specifier cell names¶

io-channel cells: positive, negative