This is the documentation for the latest (main) development branch of Zephyr. If you are looking for the documentation of previous releases, use the drop-down menu on the left and select the desired version.

st,stm32f105-pll2-clock¶

Vendor: STMicroelectronics

Description¶

PLL2 node binding for Connectivity line devices (STM32F105/STM32F107)

Takes clk_hse as input clock, using prediv as prescaler.

Each PLL as its own output clock.

  f(PLL2CLK) = f(PLL2IN) / PREDIV * PLLMUL --> PLL (System Clock)

Properties¶

Properties not inherited from the base binding file.

Name

Type

Details

mul

int

PLL multiplication factor for output clock

This property is required.

Legal values: 8, 9, 10, 11, 12, 13, 14, 16, 20

#clock-cells

int

Number of items to expect in a Clock specifier

This property is required.

prediv

int

Configurable prescaler
Valid range: 1 - 16

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “st,stm32f105-pll2-clock” compatible.

Name	Type	Details
`clocks`	`phandle-array`	Clock gate information This property is required.
`status`	`string`	indicates the operational status of a device Legal values: `'ok'`, `'okay'`, `'disabled'`, `'reserved'`, `'fail'`, `'fail-sss'` See Important properties for more information.
`compatible`	`string-array`	compatible strings This property is required. See Important properties for more information.
`reg`	`array`	register space See Important properties for more information.
`reg-names`	`string-array`	name of each register space
`interrupts`	`array`	interrupts for device See Important properties for more information.
`interrupts-extended`	`compound`	extended interrupt specifier for device
`interrupt-names`	`string-array`	name of each interrupt
`interrupt-parent`	`phandle`	phandle to interrupt controller node
`label`	`string`	Human readable string describing the device (used as device_get_binding() argument) See Important properties for more information.
`clock-names`	`string-array`	name of each clock
`#address-cells`	`int`	number of address cells in reg property
`#size-cells`	`int`	number of size cells in reg property
`dmas`	`phandle-array`	DMA channels specifiers
`dma-names`	`string-array`	Provided names of DMA channel specifiers
`io-channels`	`phandle-array`	IO channels specifiers
`io-channel-names`	`string-array`	Provided names of IO channel specifiers
`wakeup-source`	`boolean`	Property to identify that a device can be used as wake up source. When this property is provided a specific flag is set into the device that tells the system that the device is capable of wake up the system. Wake up capable devices are disabled (interruptions will not wake up the system) by default but they can be enabled at runtime if necessary.