This is the documentation for the latest (main) development branch of Zephyr. If you are looking for the documentation of previous releases, use the drop-down menu on the left and select the desired version.

nuvoton,npcx-pcc

Vendor: Nuvoton Technology Corporation

Description

Nuvoton, NPCX PCC (Power and Clock Controller) node.
Besides power management, this node is also in charge of configuring the
Oscillator Frequency Multiplier Clock (OFMCLK), which is derived from
High-Frequency Clock Generator (HFCG), is the source clock of Cortex-M4 core
and most of NPCX hardware modules.

Here is an example of configuring OFMCLK and the other clock sources derived
from it in board dts file.
&pcc {
    clock-frequency = <DT_FREQ_M(100)>; /* OFMCLK runs at 100MHz */
    core-prescaler = <5>; /* CORE_CLK runs at 20MHz */
    apb1-prescaler = <5>; /* APB1_CLK runs at 20MHz */
    apb2-prescaler = <5>; /* APB2_CLK runs at 20MHz */
    apb3-prescaler = <5>; /* APB3_CLK runs at 20MHz */
};

Properties

Properties not inherited from the base binding file.

Name

Type

Details

clock-frequency

int

 
Default frequency in Hz for HFCG output clock (OFMCLK). Currently,
only the following values are allowed:
  100000000, 100 MHz
  96000000, 96 MHz
  90000000, 90 MHz
  80000000, 80 MHz
  66000000, 66 MHz
  50000000, 50 MHz
  48000000, 48 MHz
  40000000, 40 MHz (default value after reset)
  33000000, 33 MHz

This property is required.

Legal values: 100000000, 96000000, 90000000, 80000000, 66000000, 50000000, 48000000, 40000000, 33000000

core-prescaler

int

 
Core clock prescaler (FPRED). It sets the Core frequency, CORE_CLK, by
dividing OFMCLK(MCLK) and needs to meet the following requirements.
- CORE_CLK must be set to 4MHz <= CORE_CLK <= 100MHz.
= Only the following values are allowed:
  1, CORE_CLK = OFMCLK
  2, CORE_CLK = OFMCLK / 2
  3, CORE_CLK = OFMCLK / 3
  4, CORE_CLK = OFMCLK / 4
  5, CORE_CLK = OFMCLK / 5
  6, CORE_CLK = OFMCLK / 6
  7, CORE_CLK = OFMCLK / 7
  8, CORE_CLK = OFMCLK / 8
  9, CORE_CLK = OFMCLK / 9
  10, CORE_CLK = OFMCLK / 10

This property is required.

Legal values: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10

apb1-prescaler

int

 
APB1 prescaler. It sets the APB1 bus frequency, APB1_CLK, by dividing
OFMCLK(MCLK) and needs to meet the following requirements.
- APB1_CLK must be set to 4MHz <= APB1_CLK <= 50MHz.
- APB1_CLK must be an integer division (including 1) of CORE_CLK.
= Only the following values are allowed:
  1, APB1_CLK = OFMCLK
  2, APB1_CLK = OFMCLK / 2
  3, APB1_CLK = OFMCLK / 3
  4, APB1_CLK = OFMCLK / 4
  5, APB1_CLK = OFMCLK / 5
  6, APB1_CLK = OFMCLK / 6
  7, APB1_CLK = OFMCLK / 7
  8, APB1_CLK = OFMCLK / 8
  9, APB1_CLK = OFMCLK / 9
  10, APB1_CLK = OFMCLK / 10

This property is required.

Legal values: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10

apb2-prescaler

int

 
APB2 prescaler. It sets the APB2 bus frequency, APB2_CLK, by dividing
OFMCLK(MCLK) and needs to meet the following requirements.
- APB2_CLK must be set to 8MHz <= APB2_CLK <= 50MHz.
- APB2_CLK must be an integer division (including 1) of CORE_CLK.
= Only the following values are allowed:
  1, APB2_CLK = OFMCLK
  2, APB2_CLK = OFMCLK / 2
  3, APB2_CLK = OFMCLK / 3
  4, APB2_CLK = OFMCLK / 4
  5, APB2_CLK = OFMCLK / 5
  6, APB2_CLK = OFMCLK / 6
  7, APB2_CLK = OFMCLK / 7
  8, APB2_CLK = OFMCLK / 8
  9, APB2_CLK = OFMCLK / 9
  10, APB2_CLK = OFMCLK / 10

This property is required.

Legal values: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10

apb3-prescaler

int

 
APB3 prescaler. It sets the APB3 bus frequency, APB3_CLK, by dividing
OFMCLK(MCLK) and needs to meet the following requirements.
- APB3_CLK must be set to 12.5MHz <= APB3_CLK <= 50MHz.
- APB3_CLK must be an integer division (including 1) of CORE_CLK.
= Only the following values are allowed:
  1, APB3_CLK = OFMCLK
  2, APB3_CLK = OFMCLK / 2
  3, APB3_CLK = OFMCLK / 3
  4, APB3_CLK = OFMCLK / 4
  5, APB3_CLK = OFMCLK / 5
  6, APB3_CLK = OFMCLK / 6
  7, APB3_CLK = OFMCLK / 7
  8, APB3_CLK = OFMCLK / 8
  9, APB3_CLK = OFMCLK / 9
  10, APB3_CLK = OFMCLK / 10

This property is required.

Legal values: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10

apb4-prescaler

int

 
APB4 prescaler. It sets the APB4 bus frequency, APB4_CLK, by dividing
OFMCLK(MCLK) and needs to meet the following requirements.
- APB4_CLK must be set to 8MHz <= APB4_CLK <= 50MHz.
- APB4_CLK must be an integer division (including 1) of CORE_CLK.
= Only the following values are allowed:
  1, APB4_CLK = OFMCLK
  2, APB4_CLK = OFMCLK / 2
  3, APB4_CLK = OFMCLK / 3
  4, APB4_CLK = OFMCLK / 4
  5, APB4_CLK = OFMCLK / 5
  6, APB4_CLK = OFMCLK / 6
  7, APB4_CLK = OFMCLK / 7
  8, APB4_CLK = OFMCLK / 8
  9, APB4_CLK = OFMCLK / 9
  10, APB4_CLK = OFMCLK / 10

Legal values: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10

ram-pd-depth

int

 
Valid bit-depth of RAM block Power-Down control (RAM_PD) registers.
Each bit in RAM_PDn can power down the relevant RAM block by setting
itself to 1 for better power consumption and this valid bit-depth
varies in different NPCX series.

Legal values: 12, 15

#clock-cells

int

 
Number of items to expect in a Clock specifier

This property is required.

Specifier cell names

  • clock cells: bus, ctl, bit