| 
    Zephyr API Documentation
    2.7.0-rc2
    
   A Scalable Open Source RTOS 
   | 
 
Attribute Protocol handling. More...
#include <sys/slist.h>Go to the source code of this file.
Attribute Protocol handling.
| #define BT_ATT_ERR_ATTRIBUTE_NOT_FOUND 0x0a | 
| #define BT_ATT_ERR_ATTRIBUTE_NOT_LONG 0x0b | 
| #define BT_ATT_ERR_AUTHENTICATION 0x05 | 
| #define BT_ATT_ERR_AUTHORIZATION 0x08 | 
| #define BT_ATT_ERR_CCC_IMPROPER_CONF 0xfd | 
| #define BT_ATT_ERR_DB_OUT_OF_SYNC 0x12 | 
| #define BT_ATT_ERR_ENCRYPTION_KEY_SIZE 0x0c | 
| #define BT_ATT_ERR_INSUFFICIENT_ENCRYPTION 0x0f | 
| #define BT_ATT_ERR_INSUFFICIENT_RESOURCES 0x11 | 
| #define BT_ATT_ERR_INVALID_ATTRIBUTE_LEN 0x0d | 
| #define BT_ATT_ERR_INVALID_HANDLE 0x01 | 
| #define BT_ATT_ERR_INVALID_OFFSET 0x07 | 
| #define BT_ATT_ERR_INVALID_PDU 0x04 | 
| #define BT_ATT_ERR_NOT_SUPPORTED 0x06 | 
| #define BT_ATT_ERR_OUT_OF_RANGE 0xff | 
| #define BT_ATT_ERR_PREPARE_QUEUE_FULL 0x09 | 
| #define BT_ATT_ERR_PROCEDURE_IN_PROGRESS 0xfe | 
| #define BT_ATT_ERR_READ_NOT_PERMITTED 0x02 | 
| #define BT_ATT_ERR_SUCCESS 0x00 | 
| #define BT_ATT_ERR_UNLIKELY 0x0e | 
| #define BT_ATT_ERR_UNSUPPORTED_GROUP_TYPE 0x10 | 
| #define BT_ATT_ERR_VALUE_NOT_ALLOWED 0x13 | 
| #define BT_ATT_ERR_WRITE_NOT_PERMITTED 0x03 | 
| #define BT_ATT_ERR_WRITE_REQ_REJECTED 0xfc | 
| #define BT_ATT_FIRST_ATTTRIBUTE_HANDLE 0x0001 | 
| #define BT_ATT_LAST_ATTTRIBUTE_HANDLE 0xffff | 
| #define BT_ATT_MAX_ATTRIBUTE_LEN 512 |