This is the documentation for the latest (main) development branch of Zephyr. If you are looking for the documentation of previous releases, use the drop-down menu on the left and select the desired version.

LP5562: 4-Channel RGB

Overview

This sample controls 4 LEDs connected to a TI LP5562 driver, using the following pattern:

  1. turn on LEDs to be red

  2. turn on LEDs to be green

  3. turn on LEDs to be blue

  4. turn on LEDs to be white

  5. turn on LEDs to be yellow

  6. turn on LEDs to be purple

  7. turn on LEDs to be cyan

  8. turn on LEDs to be orange

  9. turn off LEDs

  10. blink the LEDs in white

  11. turn off LEDs

  12. blink the LEDs in purple

  13. turn off LEDs

Refer to the LP5562 Manual for the RGB LED connections and color channel mappings used by this sample.

Building and Running

Build the application for the nRF52840 DK board, and connect a LP5562 LED driver on the bus I2C0 at the address 0x30.

west build -b nrf52840dk_nrf52840 samples/drivers/led_lp5562

For flashing the application, refer to the Flashing section of the nRF52840 DK board documentation.