This is the documentation for the latest (main) development branch of Zephyr. If you are looking for the documentation of previous releases, use the drop-down menu on the left and select the desired version.

CSK6012 9S Scanpen samples

Overview

本Sample为scanpen的硬件驱动使用示例合集。

目前已集成： 1. LCD驱动 #. LCD_PWM驱动 #. 触摸屏驱动 #. CAM_LED驱动 #. Keysense驱动 #. ADC驱动 #. pwr_lock 上电拉高锁定

ADC检测按键

注意：因为LCD_PWM需要使用到芯片SDIO PIN配置为PWM功能进行驱动，所以上电5s后将不可下载程序。

Building and Running

The sample can be built and flashed as follows:

Sample Output

*** Booting Zephyr OS build 3d7257d84a3c  ***
[00:00:00.153,000] <inf> sample: 下载模式,5s后变为PWM模式不可下载程序，重新下载需要上电并在5s内进行下载
[00:00:00.153,000] <inf> sample: ADC Sample start
[00:00:00.153,000] <inf> sample: adc_vref 3300.
[00:00:00.153,000] <inf> sample:  adc(0)= -26400 mV
[00:00:01.453,000] <inf> sample:  adc(2455)= 5240 mV
[00:00:02.753,000] <inf> sample:  adc(2456)= 5256 mV
[00:00:04.053,000] <inf> sample:  adc(2464)= 5360 mV
[00:00:05.153,000] <inf> sample: PWM模式
[00:00:05.153,000] <inf> sample: csk6 keysense sample application
[00:00:05.153,000] <inf> sample: key_dev init success!
[00:00:05.353,000] <inf> sample:  adc(2464)= 5360 mV
[00:00:06.654,000] <inf> sample:  adc(2455)= 5240 mV
[00:00:07.954,000] <inf> sample:  adc(2455)= 5240 mV
[00:00:09.254,000] <inf> sample:  adc(2455)= 5240 mV